A Gas tank for the
Hornby Rocket Locomotive. Click
here for details.
Boiler Pressure Regulator.
Forest Classics, sponsors
of Robert Handcock &
Ken Edwards, at the Isle
of Man TT races.
Congratulations to Rob & Ken for winning 5th place at the 2012 Sidecar event!
Visit RJ Road Racing website
Please note that both finished engines and all castings and accessories are
original American factory supplied products.
- Page 1
here to go to Page 2.
A barstock package is available for those not lucky enough to have common
laying around the shop. Materials like flat stock, round stock, hex stock,
and all of the other metal and brass parts that are needed to build your
For either Red Wing Engines.
Part No: R-BAR
Scale MixerCasting Kit This mixer is used on both of our model gas engines, the ¼
scale of the 5 hp Red Wing Engine and the
scale of the 2½ hp Red Wing Engine.Kit
includes the mixer and nut castings as well as the main valve spring, needle
o-ring and a complete set of plans!
Part No: MIX-1C
Scale Mixer – Finished Mixer This mixer is used on both, the ¼
scale 5 hp and the ⅓
scale 2½ hp Red Wing Model Engines.
The completed mixer comes fully machined and assembled ready to run!
Part No: MIX-1M
Oak Buzz Coil
This high quality Buzz Coil provides a powerful spark. It
will operate from a wide range of DC voltages. A small 9 Volt
rechargeable battery pack is commonly used as a power source. It works just as
well when a 12 volt car battery is used as the power source. The box measures
4½" x 2¾" x 3¼" tall and is constructed from Oak.
Part No: BUZZ-1
Thread size: 5/32-40
Part No: DC-532
Part No: DC-3
Spark Plug The NGK CM-6 is
standard for the Red Wing as well
as other model engines.
Part No: R-SP-CM6
Spark Plug Tap Metric 10X1 Tap
threading the spark plug hole on your engine.
Part No: T-M10X1
Spark Plug Wire
This 14 GA cloth covered wire will improve the look of any
model engine. The wire is orange (Oak) with red & black tracers. This spark
plug wire will work for the Red Wing as well as other engine models. Sold by